3 Axis ("X", "Y", "Z") Milling Equipment
Applications include milling of turbine, generator, and pump casing horizontal joints, sole plates, machinery foundations, and motor bases. Capable of precise milling of surfaces flat & level, and/or drilling over large areas. Also utilized to achieve flatness and parallelism in steel mill applications. Window machining, Bottom Pad machining, Load Cell Seat machining, Feed Roll Nest Seat machining, Table Roll Pocket machining, Shear Knife Block Seat machining, and Mae West Machining. All portable milling machines can be electrically, or hydraulically driven. RA/Equipped with Right Angle Head MF/Equipped with Motorized Feed.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| 17.5 ft |
MM-001 |
Hyd/Ele |
Sta |
2 |
| 12 ft |
MM-002 |
Hyd/Ele |
Sta |
2 |
| 10 ft |
MM-003 |
Hyd/Ele |
Sta |
2 |
| 8 ft |
MM-004 |
Hyd/Ele |
Sta |
5 |
| 7 ft |
MM-005 |
Hyd/Ele |
Sta |
2 |
| 6 ft |
MM-006 |
Hyd/Ele |
Sta |
2 |
| 5 ft |
MM-007 |
Hyd/Ele |
Sta |
5 |
| 3 ft |
MM-008 |
Hyd/Ele |
Sta |
2 |
Bottle Boring Machine
Applications include deep hole bottle boring to Turbine Rotors and Generator Rotors. Diameters range from 3" to 18. Lengths are unlimited.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| All |
BBM-001 |
Hyd/Ele |
Ext |
4 |
Coupling Hole Boring Machine
Applications include line boring to couplings of all types. Straight or tapered holes ranging from 2" dia. To 10" dia. Length unlimited
| Size | Control No. | DriveType | MountType | Qty. Avail. |
|---|
| All |
CBM-001 |
Hyd/Ele |
Ext |
4 |
Deep Hole Drilling and Boring Equipment
Applications include drilling and boring to turbine and generator shafts. Any other shafting or equipment requiring long/deep hole drilling. Equipment is also capable of Trepanning. Complete BTA System with pressure head, spindle, coolant pump and rods.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| All sizes |
DHD-01 |
Deep Hole Drilling Machines |
Sta |
1 |
| All sizes |
TPM-001 |
BTA Trepanning System |
Sta |
1 |
| 7.5 dia. |
TPH-001 |
Trepanning Head 7.5" diameter |
Sta |
1 |
Electric Drill Units, Magnetic Base
Capable of driving a wide variety of rotary tool bits in any direction. Applications include all types of drilling, reaming, and/or tapping.
All drilling equipment is capable of some degree of boring.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| Large |
PPPDM-001 |
Large Lamina boring drilling machines. |
Ext. |
2 |
| Medium |
PDM-002 |
Large Lamina boring drilling machine |
Ext. |
2 |
| Small |
PDM-003 |
Medium Lamina boring drilling. |
Ext. |
2 |
| 3 H.P. |
PDM-004 |
Medium Size magnetic base drilling |
Ext. |
8 |
Electrical Discharge Machine
Applications include removal of metal using electrical pulses to disintegrate and flush material from a specified area (hole). Can be performed on broken bolts, sheared keys, etc?. These machines are specially designed for quick, precision excavation of most types of metal, in any position.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| Uni-Tec |
EDM-001 |
Electronic Discharge Machine |
Ext |
1 |
| Commando |
EDM-002 |
Electronic Discharge Machine |
Ext |
1 |
Forming Roll
Applications include rolling and forming of turbine rotor bucket covers / shrouds.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| 6" x 3/8" |
CSR-001 |
Ele |
Sta |
1 |
Hole Honing Machine
Applications include honing of vertical and horizontal holes. Able to achieve extremely precise radial dimensions and surface finishes with minimal taper and eccentricity. Works across a wide range of materials.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| Up to 2" |
HHM-01 |
Pne/Ele |
Int |
1 |
| 2" to 4" |
HHM-02 |
Pne/Ele |
Int |
1 |
| 4" to 12" |
HHM-03 |
Pne/Ele |
Int |
1 |
| Over 12" |
HHM-04 |
Pne/Ele |
Int |
1 |
Hydraulic Drill Units, Magnetic Base
Capable of driving a wide variety of rotary tool bits in any orientation. Applications include all types of drilling, reaming, and/or tapping. Also available without the magnetic base.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| #3 MT-1" |
HD-01 |
Hyd/Ele |
Ext |
1 |
| #4 MT-2" |
HD-02 |
Hyd/Ele |
Ext |
1 |
| #5 MT-3" |
HD-03 |
Hyd/Ele |
Ext |
1 |
| 40 Mach-4" |
HD-04 |
Hyd/Ele |
Ext |
1 |
| 50 Mach-5" |
HD-05 |
Hyd/Ele |
Ext |
1 |
Hydraulic Power Unit
Rugged hydraulic drive units offer the greatest control of speed and power over a wide range of applications.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| 5 HP |
HPU-001 |
Hydraulic Drive Unit |
|
2 |
| 10 HP |
HPU-002 |
Hydraulic Drive Unit |
|
3 |
| 15 HP |
HPU-003 |
Hydraulic Drive Unit |
|
4 |
Journal Squirrels
Applications include refinishing to all types of stub shaft and trunnion machining, where the shaft must remain stationary. Capable of precision machining with good surface finishes.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| Up to 7" |
JS-01 |
Climax Journal Squirrel |
Ext |
1 |
| 7" to 11" |
JS-02 |
Climax Journal Squirrel |
Ext |
1 |
| Over 11" |
JS-03 |
Climax Journal Squirrel |
Ext |
1 |
Keyway Cutting Machines
Applications include cutting of keyways to shafting of all diameters and lengths.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| 1" |
KCM-001 |
Climax Keyway Cutting Machine |
Int/Ext |
1 |
| 3" |
KCM-002 |
Climax Keyway Cutting Machine |
Int/Ext |
1 |
Metalizing Equipment
Applications include metal spray to shafts, journals, and wear surface of all types.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| 2000 |
MSE-001 |
Eutectic Castolin System 2000 Tero |
Sta |
1 |
Portable Lathe
Applications include machining of seal strips, blade fits, rabbit fits, bearing journals, thrust faces, and seal areas on turbine rotors and/or generator rotors. Rated Capacity of 250 Tons, with a 215 bin. Swing over a 70 ft. length.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| 250 Ton |
PL-001 |
Hyd |
Ext |
1 |
Portable Machine Shop
Contains lathe, Bridgeport milling machine, grit blast, surface grinder, welding capabilities, drill press, crane, with fire retardant system and central air collection system.
Ideal for all small machining support applications while on site during outages and overhaul
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| 40" |
PS-001 |
|
|
2 |
Punch Press
Applications include punching of turbine rotor bucket cover tenon holes.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| 50 Ton |
BCP-001 |
Hyd/Ele |
Sta |
2 |
Rotor Bore Honing Machining
Applications include deep hole honing to Turbine rotors and Generator rotors. Diameters range from 3" to 18". Lengths are unlimited.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| All |
RBM-001 |
Hyd/Ele |
Ext |
4 |
Shaft Machining Fixtures
Applications include machining, grinding, and polishing of shafts. Provides great mounting and machining flexibility with precise surface finishes. This application requires no shaft rotation.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| Up to 20" |
JEM-001 |
End Mount Machine up to 24"L |
Sta |
1 |
| Up to 12" |
JEM-002 |
End Mount Machine up to 24"L |
Sta |
1 |
| Up to 10" |
JEM-003 |
End Mount Machine up to 12"L |
Sta |
1 |
Standard Boring Bars
Applications include boring and line-boring of turbines,generators, discharge tube, pump and valve bodies, diesel engines, stern tubes, struts, stabilizer fin bores and rudder bores. Frame and Gear Box Boring.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| 12" O Bar |
PBB-001 |
8 Ele Boring Bar |
Int |
2 |
| 10" O Bar |
PBB-002 |
6 Ele Boring Bar |
Int |
2 |
| 8" O Bar |
PBB-003 |
6 Ele Boring Bar |
Int |
2 |
| 6" O Bar |
PBB-004 |
8 Ele Boring Bar |
Int |
4 |
| 6" O Bar |
PBB-005 |
6 Ele Boring Bar |
Int |
2 |
| 6" O Bar |
PBB-006 |
4 Ele Boring Bar |
Int |
2 |
| 4" O Bar |
PBB-007 |
8 Ele Boring Bar |
Int |
4 |
| 4" O Bar |
PBB-008 |
4 Ele Boring Bar |
Int |
2 |
| 3" O Bar |
PBB-009 |
40" Ele Boring Bar |
Int |
2 |
| 1"-2" |
PBB-010 |
Various Lengths |
Int |
10 |
Standard Flange Facing Equipment
Applications include machining or grinding flat or phonographic finishes on flange faces, O-ring grooves, seal areas, counter bores, and limited in-line boring.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| Up to 12" O |
PFF-001 |
Hyd/Pne/Ele |
Int/Ext |
2 |
| 12" to 24" O |
PFF-002 |
Hyd/Pne/Ele |
Int/Ext |
2 |
| 24" to 36" O |
PFF-003 |
Hyd/Pne/Ele |
Int/Ext |
1 |
| 36" to 48" O |
PFF-004 |
Hyd/Pne/Ele |
Int/Ext |
1 |
| 48" to 72" O |
PFF-005 |
Hyd/Pne/Ele |
Int/Ext |
1 |
Stationary Machining, Honing & Polishing Journal
Applications include refinishing to all types of bearing journals, crankshaft journals, hydrogen seals, collector rings (including re-grooving), trust runners, and gland seal areas. These machines are capable of achieving & maintaining extremely close radial dimensions, concentricity, eccentricity, and lack of taper, all within 0.0005"; and in many cases eliminates the need of a lathe.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| Up to 12" O |
OHP-001 |
Stationary Journal Machining Center |
Ext |
2 |
| 12" to 24" O |
OHP-002 |
Stationary Journal Machining Center |
Ext |
2 |
| 24" to 36" O |
OHP-003 |
Stationary Journal Machining Center |
Ext |
2 |
| 36" to 48" O |
OHP-004 |
Stationary Journal Machining Center |
Ext |
2 |
Stationary Thrust Surface Equipment
Applications include machining, grinding, honing, and polishing thrust faces, runners, and gland seal areas. These machines are capable of achieving extremely smooth surface finishes while maintaining perpendicularity with the axis of rotation.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| Up to 12 in. dia. |
STF-001 |
Electric |
Ext |
1 |
| 12 to 24 in. dia. |
STF-002 |
Electric |
Ext |
1 |
| 24 to 36 in. dia. |
STF-003 |
Electric |
Ext |
1 |
| 36 to 48 in. dia. |
STF-004 |
Electric |
Ext |
1 |
Tapered Cutting Journal Squirrels
Applications include refinishing to all types of tapered stub shaft and trunnion machining, where the shaft must remain stationary. Capable of precision machining with good surface finishes.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| Up to 7 in. dia. |
TJS-001 |
Hyd/Ele |
Ext |
4 |
| 7 to 11 in. dia. |
TJS-002 |
Hyd/Ele |
Ext |
4 |
| Over 11 in. dia. |
TJS-003 |
Hyd/Ele |
Ext |
7 |
Tapered Stationary Journal Machining Center
Applications include refinishing to all types of tapered bearing journals and shafts. These machines are capable of achieving & maintaining extremely close radial dimensions, concentricity, eccentricity, and lack of taper; and may eliminate the need of a lathe.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| Up to 12 in. dia. |
TJM-001 |
Ele |
Ext |
1 |
| 12 to 24 in. dia. |
TJM-002 |
Ele |
Ext |
1 |
| 24 to 36 in. dia. |
TJM-003 |
Ele |
Ext |
1 |
Trinco Dry Blast
Utilized for miscellaneous parts cleaning during outages, turn-a-rounds, and overhauls.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| 48" x 36X |
GBB-001 |
Ele |
Sta |
2 |
Weld Prep Equipment
Applications include any style or profile pipe preps, and pipe cutting of all pipe schedules.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| Up to 6 in. dia. |
PPM-001 |
Hyd/Pne/Ele |
Int/Ext |
1 |
| 6 to 12 in. dia. |
PPM-002 |
Hyd/Pne/Ele |
Int/Exe |
1 |
| 12 to 18 in. dia. |
PPM-003 |
Hyd/Pne/Ele |
Int/Exe |
1 |
| 18 to 24 in. dia. |
PPM-004 |
Hyd/Pne/Ele |
Int/Exe |
1 |
| 24 to 30 in. dia. |
PPM-005 |
Hyd/Pne/Ele |
Int/Exe |
1 |
| 30 to 36 in. dia. |
PPM-006 |
Hyd/Pne/Ele |
Int/Exe |
1 |
Welding Machines
Applications include all aspects of welding. Equipment is applicable to all facets of steam path repair welding.
| Size | Control No. | Drive Type | Mount Type | Qty. Avail. |
|---|
| 300 Amp |
EWU-001 |
High Frequency AC/DC Tig Machine |
AC/DC Tig |
14 |
| 300 Amp |
EWU-001 |
High Frequency DC Tig/w MIG |
DC/w MIG |
4 |
| 300 Amp |
EWU-001 |
Miller Stick (gas) Machine |
Stick (gas) |
3 |
| 300 Amp |
EWU-001 |
Miller DC Machine |
DC |
2 |